- Home
- About Us
- Chillers
- Industrial RO System
- Gallery
- Exhibition
- Certificates
- Infrastructure
- Contact Us
At Aquatech Plus, we provide high performance water pre-treatment systems that suit the various water quality needs in industries. We utilize materials that are long last to build our systems and develop efficient filtration systems that are effective in the long run.
As trusted Water Pretreatment Systems Manufacturers in India, Aquatech Plus develops high-performance Water Pre-treatment Systems that treat raw water to facilitate the subsequent purification process. Naturally occurring water, found in the natural reservoirs, borewells or municipal supply, usually includes suspended solids, hardness minerals, organic, microorganisms and other contaminants which may cause damage to treatment equipment and also lower efficiency of the systems.
These impurities are removed by water pre-treatment systems before the water is subjected to the sophisticated treatment regimens like reverse osmosis (RO), ion exchange, or ultrafiltration. Water pre-treatment systems ensure that the membranes are not fouled, scaled, corroded and that down time is expensive, so by pre-treating the water, it is prevented.
It produces quality water, efficient systems, and long life equipment, thus pre-treatment is the backbone of any reputable water treatment system.
Being one of the growing Water Pretreatment Systems Suppliers in India, Aquatech Plus offers quality and tailored pre-treatment systems that are used in industries, commercial and municipal purposes. Pre-treatment of water is very important in the elimination of suspended solids, turbidity, color, odor, and microorganisms until water is subjected to the advanced water treatment technology like reverse osmosis (RO) or demineralization plants.
In India, industries depend on the efficient pre-treatment systems to safeguard the downstream equipment as well as stabilize the quality of water. The technologies usually supplied by the suppliers of these systems are pressure sand filters, activated carbon filters, chemical dosing systems and water softeners to treat the raw water appropriately before subjecting it to the main treatment process.
At Aquatech Plus, we provide high performance water pre-treatment systems that suit the various water quality needs in industries. We utilize materials that are long last to build our systems and develop efficient filtration systems that are effective in the long run.
These systems enjoy a wide use in industrial sectors where the quality of water used by the industries remains constant.
Water pretreatment system refers to a blend of filtration, chemical dosing and conditioning system which are applied to remove impurities in raw water before it gets into the main purification system.
The contaminants that can be found in raw water include:
Unless such contaminants are removed beforehand, they may cause a plugging of filters, damage membranes and slow the operation of treatment systems. Before the further purification, the pre-treatment systems make the water coming in the system stable, clean and fit to be further purified.
An appropriate pre-treatment system is important to the effectiveness and dependability of the water treatment plants.
Advanced technology like RO membrane and ion exchange resin is very sensitive to impurities. The pre-treatment will remove the particles and dissolved minerals which might otherwise lead to scaling, foulings and corrosion.
Pre-treatment reduces the need to do regular cleaning, replace filters and unexpected system failures. This will save a lot on maintenance and increase the reliability of the system.
The pre-treatment stabilizes the important water parameters like turbidity, hardness and pH which gives consistent feed water to the downstream treatment processes.
Effective pre-treatment systems are systems that combine a number of treatment technologies to eliminate various kinds of contaminants.
Coagulation and flocculation entails the application of special chemicals on water, which assist in the combination of tiny suspended particles into bigger groups called flocs. Removal of these larger particles is then easily obtainable through filtration.
It is most effective in the elimination of:
It is also common in the industrial and municipal water treatment plants.
One of the most commonly used pre-treatment ways is media filtration. It involves using filtration material layers of sand, gravel and anthracite to take away turbidity and suspended solids of water.
Typical types of filtration systems are:
Such systems play a great role in enhancing water clarity prior to undergoing subsequent treatment processes.
Activated carbon filters are aimed at removing chlorine, organic substances, taste and odors in the water. The chlorine pre-treatment is required, especially, before using the reverse osmosis treatment, which can destroy RO membranes.
Activated carbon filtration enhances:
The minerals that are found in hard water include calcium, magnesium, which help in scaling the inside of the pipes, boilers, and membranes. These hardness minerals are removed by water softeners through ion exchange technology which replaces them with sodium ions.
The advantages of softening are:
In certain industries, the pre-treatment level is greater and pre-treatment is carried out. Advanced fine particle, bacteria and microorganism removal is offered by membrane technologies as microfiltration (MF) and ultrafiltration (UF).
These systems are typical in the industries, in which the purity of water is of great importance.
The chemical dosing systems are used to control the chemistry of water in order to enhance the treatment process. They are useful in the control of scaling, corrosion and microbial growth in the system.
Chemicals that have been used commonly are:
Correct water chemistry implies stable and effective working of treatment equipment.
Being the top Water Pretreatment Systems Exporters in India, Aquatech Plus provides highly innovative water pre-treatment system to global markets. With the ever growing needs by industries across the globe that require high quality water in manufacturing and processing, it has been seen that efficient pre-treatment systems are a mandatory solution in ensuring that there is reliable water purification infrastructure.
Indian companies that specialize in water treatment have become renowned in producing economically viable and technologically advanced water treatment systems that have been utilized in a wide range of industries in the world such as in pharmaceuticals, food processing, and power generation industries. In India, there are also a few engineering firms dealing with water and wastewater treatment processes in industries and municipal purposes.
We are Aquatech Plus and we are exporters of high performance water pre-treatment systems, which are of international quality standards. The design of our solutions is such that it can manage the diverse conditions of raw water and operate well under the different environmental and industrial environments.
Export-Quality Pre-treatment Systems:
Our export range includes:
All the systems are meticulously built to enable them to be durable, highly efficient and give a stable work performance within the strict industrial settings.
A total pre-treatment system is usually carried out in a systematic procedure in order to eliminate the contaminants.
Typical process flow:
Each of the stages is to prepare the water to the next stage of purification.
Industries that have their production processes directly influenced by the quality of water should have water pre-treatment systems.
The adoption of an efficient pre-treatment system offers important savings on operations.
Key benefits include:
At Aquatech Plus, our specialty is to design efficient and reliable water pre-treatment systems that meet the needs of our customers in their individual interest.
Being a long-term manufacturer and water treatment specialists, we provide:
We aim to provide the systems that will give long term performance, operation efficiency and reliable water quality.
The first important step in a successful process of water treatment is water pre-treatment. Pre-treatment systems also prevent the damage of downstream equipment by eliminating impurities and stabilizing the quality of water, and enhance the performance of purification systems.
A proper design and technology will enable businesses to lower operational expenses, enhance the water quality, as well as increase the life span of their treatment systems.
Aquatech Plus offers highly efficient and efficient Water Pre-treatment Systems, which are capable of satisfying the needs of the modern industry.
We have a uniform workflow in packaging and logistics that is export-wise, which prepares all our products except that they are safe in handling and delivery with no damages in India and other countries. Every phase is also thought out to cushion equipment against vibration, impact, and moisture risks in addition to long-distance transportation risks. The same is done to water chillers, air chillers and all other products that we produce and supply.
The process starts with mechanical repair of the unit of the product. The industrial quality fastening is used in all internal assemblies, critical parts, piping, and electrical parts. Moving components are fixed, and vibration-sensitive sites are fixed to avoid the mechanical stress during the transportation.
Objective: Avoid internal movement, vibration breakage, and alignments during transportation.
Once the repair is done the product is inner-packed with moisture-proof and shock absorbing materials. Foam padding, stretch film and cushioning materials are used as protective layers to cover all the exposed areas and all those components which are sensitive.
Objective: Dust, humidity, surface abrasion, and small mechanical shocks.
The product is packed in a specially designed heavy-duty plyboard box which is produced depending on its size and weight. The casing of the plywood is strengthened to resist the weights of the stacking, forklift operation and the transportation strain over long distances. When exporting goods, the packing is done to comply with the shipping and container loading requirements by the international community.
Objective: Optimal security on the outside and the requirements of the domestic and export logistics.
The product is loaded to the trucks with the use of cranes or forklifts, in accordance with good lifting and load-sharing practices. The delivery is then by road under conditions of control. In the case of domestic clients, the truck will go straight to the facility of the customer.
Objective: Loading and stable transportation on the road.
Whereas in international deliveries, the shipment is taken out of our plant to the Indian port. Pre-port entry All the export documentation, labeling and compliance checks are done before port entry.
Our logistics partners are reputable and trusted individuals like EMS, DHL Express, and FedEx Express who help us to have an easy time moving the ports and handling the exports.
Goal: The port handling and export preparation are smooth.
After clearance in the port, the product is delivered through sea freight into the destination port of the client. The packaging is to maintain a long transit period, container handling and a fluctuating weather pattern.
The international deliveries are also arranged with the help of the existing world logistics systems, the EMS, DHL Express and FedEx Express, which guarantee the safe and timely delivery.
Purpose: Achieve international delivery with low levels of transits.
A clear packaging and transportation procedure would assure that all products will be delivered to the clients in working conditions, lessen installation and commission problems, minimize the risk of transit damage, and facilitate hassle-free domestic and foreign delivery.
This is our standard operating procedure and is used in the process of packaging and transportation of all our products. Although the central process is the same, a different method can be used to pack the products, depending on the product size, weight and the destination to which the product is to be shipped.
This packaging and transportation workflow represents our standard operating process and is uniformly followed across our entire product range. The steps outlined above are not product-specific but define our company-wide logistics and export handling standards.
To maintain consistency, safety, and compliance, this process is intentionally displayed across all relevant product pages under the Packaging & Transportation section. While the framework remains the same, actual packing materials, box dimensions, and handling methods may vary depending on product size, weight, and shipment destination.
From an operational standpoint, this approach ensures:
From an SEO and documentation perspective, this section is used to clearly communicate our established logistics protocol, not to repeat marketing content. Each product page focuses on its unique specifications and applications, while this section defines our common logistics standards.
Raw water is typified by turbidity and suspended solids that readily clog the sand filters, cartridge filters or multimedia filters and reduce the flow rates requiring frequent backwashing or substitution.
Even hardness ions such as calcium and magnesium become deposited in pipes, boilers and RO membranes when water chemistry changes with the season or water softeners are not regenerated in a proper procedure that will result in their loss in efficiency and corrosion.
Because of the lack of UF/MF or UV treatment, bacteria, algae, and organisms multiply in untreated sections, especially and block pipes over time, rupturing membranes.
Saturated and unstable flow rates caused by the presence of industries fill filters or clarifiers causing the passage of contaminants and the underperformance of the downstream system like the RO units.
Since it is not checked regularly by pH, TDS or pressure, it is not realized that it is foaming in the boilers or sludge is forming and this is hazardous in conformity and equipment failure.
Small sizes (e.g. their less than 10,000 LPH size to be run on a high volume basis) are unable to run peak demand or high iron borewell water that will result in frequent down time and iron staining.
We carry a specified warranty and effective after sales services to all goods provided by us. Our warranty and service system will be aimed at long-term performance, reliability in terms of work, and peace of mind of our clients, both domestic and international.
Every product has a standard warranty of manufacturing defects dating back to the dispatch date or the date of installation, as existing. The warranty includes the defects to the quality of material and workmanship in the normal operation condition.
There are various warranty terms based on the product category, model, application and environment of use. Specifics on warranty period and coverage are provided in detail during the confirmation of orders or issue of invoice.
Warranty is not applicable on damages caused by:
Our technical support provides our clients with instructions on how to install, answer technical questions as well as basic troubleshooting. Depending on where the project is located, support is accomplished by providing documentation, remote assistance or by organizing services with service partners.
We assist both domestic and foreign clients with well-organized contact and export documentation. In the case of international customers, technical support and service management are offered remotely to have a comfortable functioning and prompt problem resolution.
There is a process in which service requests are processed. When we get a support request, we examine the problem and determine the warranty eligibility and suggest a remedy. The response timelines can be different depending on the product, location and availability of the components.
The above warranty and support terms are the standard policy which we use in our whole product line. Particular product-level warranty information might vary and are provided independently when taking orders.
This Warranty & Support section represents our standard company-wide policy and is consistently applied across our complete product range. The content is intentionally displayed on multiple product pages to communicate uniform warranty coverage, service terms, and support procedures.
While the core policy remains the same, actual warranty duration, coverage scope, and service conditions may vary by product model, application, and operating environment. Product-specific warranty details are shared separately at the time of order confirmation or documentation.
