Ultrafiltration (UF) System is a sophisticated water treatment process that is able to remove suspended solids, bacteria, viruses and colloids from water through the use of semi-permeable membranes. The UF systems operate at low pressure, giving high efficiency filtration while retaining the essential minerals in the system, which makes it suitable for any kind of industrial or potable water application.
Ultrafiltration systems are applied in many industries including pharmaceuticals, food & beverage, dairy, chemicals and municipal water treatment. They also serve as a pre-treatment for Reverse Osmosis (RO) systems to prevent RO membrane fouling and prolong the membrane life.
The system operates by circulating water through hollow fibre or flat sheet membranes having very small pores. These membranes act as filters which allow water and smaller dissolved particles to pass through, but do not allow the larger particles through. This leaves low turbidity water with very few microbes.
UFS systems operate around the clock and automatically backwash and clean to ensure optimum performance and minimize maintenance. They are small, low power and can be tailored to suit the water quality and flow rate.
The advantages are uniform water quality, chemical-free water treatment, lower operating expenses, and efficient filtration. The investment in an Ultrafiltration System guarantees a good pre-treatment and hence better overall performance of water purification processes.
In the industries and municipal utilities, microbiologically clean and low-turbidity water is a basic necessity. Unclear water may contain suspended solids, colloids, and pathogens that interfere with downstream facilities, affect the quality of the products and raise the maintenance expenses.
The Ultrafiltration System is a reliable membrane-based application to eliminate bacteria, viruses, protozoa, and fine suspended solids. A well-designed ultrafiltration water system operates at pores in the order of 0.01 to 0.1 microns in diameter, thereby acting as a fine filter, one that includes all the harmful contaminants but does not retain the water or dissolved salts.
Aquatech Plus is a trusted Ultrafilteration Systems Manufacturers in Mehsana, providing membrane solutions designed for steady output, high recovery, and stability. With ongoing increases in water reuse, hygiene requirements, and regulatory demands, commercial and industrial ultrafiltration systems have become fundamental elements of contemporary water treatment systems.
We design our systems to be clearer and more controllable, and we provide long-term functionality for the membranes to perform in commercial and industrial settings. We can provide technical knowledge-based solutions to customers seeking the ultimate ultrafiltration water system for performance and longevity.
Aquatech Plus is regarded as one of the reliable industrial Ultrafilteration Suppliers in Mehsana. We provide fully supported projects – we provide advice on which membrane configuration to use, we install the membrane, and we maintain it.
Our capabilities include:
Before the design of a system, we carefully determine the turbidity, level of suspended solids load, and content of microorganisms. This guarantees maximum life of the membrane, less fouling and long-term stability.
Our systems are designed to be efficient and reliable whether they need to be used in municipal treatment facilities, in large-scale ultrafiltration plants, or even as pre-treatment for reverse osmosis (RO) systems.
Industries in Mehsana increasingly depend on ultrafiltration systems to achieve high water clarity and microbial control for safe operations. Areas around our major global industrial hubs show strong demand due to dense industrial activity and water reuse requirements.
our major global industrial hubs: Municipal treatment zones, pharmaceutical manufacturing clusters, food and beverage processing units, dairy plants, chemical industries, textile manufacturing hubs, engineering factories, power plants, wastewater recycling facilities, and large industrial estates.
Aquatech Plus has established a robust international presence as a reputable and credible Ultrafiltration System Exporters in Mehsana to provide innovative water purification solutions to the industries and commercial markets of international markets. Our deep sense of quality and performance has led to the export of high-efficiency Ultrafiltration Systems that are well engineered to suit the high demands of modern water treatment uses. The systems are designed to operate with a high level of consistency, even in harsh environments that require water quality, pressure fluctuations, and the constant functionality of long-lasting, reliable technology.
We design our ultrafiltration systems with strong components and precision engineering to enable them to work in difficult conditions without any change in filtration efficiency. Incorporating a creative design and a very high standard of quality, Aquatech Plus is also able to provide all exported systems with reliable water purification, service durability, and operational reliability to international clients.
Our systems are developed to process:
Being the veteran Ultrafiltration System Wholesalers in Mehsana, we assist in servicing the EPC contractors, consultants, municipal bodies, and industrial developers.
Our product range includes:
To create hybrid solutions when needed, we combine UF with a nanofiltration system or multiple nanofiltration systems to remove specific ions or parts of the salt. Such a mix allows flexibility in the usage of applications which require more than microbial control but less than complete desalination.
An Ultrafiltration system is a pressure-driven membrane filtration technology that removes suspended solids and microorganisms from water.
Working Principle:
The most common materials that are used to manufacture UF membranes include:
In comparison to Reverse Osmosis, UF (Ultrafiltration) does not eliminate dissolved salts (TDS, or total dissolved solids) or inorganic ions. A nanofiltration system can be recommended for use in applications where partial demineralisation is required after the UF treatment.
Installed in:
Designed for:
Suspended solids and pathogens may result in water that contains impurities:
The designed ultrafiltration system for water treatment serves as a physical barrier to bacteria and viruses, enhancing downstream performance and extending equipment service life.
Dead-End (Direct Flow):
Water moves straight across the membrane and solids remain on the surface. This method is most effective when dealing with lower concentrations of suspended solids.
Cross-Flow (Tangential Flow):
The water flows across the membrane surface, which minimises the fouling process and enhances the performance of highlysolid industrial ultrafiltration.
To retain performance, contemporary UF Systems consist of:
Ultrafiltration is useful in the removal of:
99.99% of bacteria (such as E. coli)
Viruses
Protozoan cysts (Giardia, Cryptosporidium)
These include silt, clay, and colloidal particles.
Microplastics
Microplastics consist of organic molecules that have a high molecular weight.
Nevertheless, dissolved salts are kept in a solution until they are combined with RO systems or nanofiltration.
Ultrafiltration plants are used on a large scale to substitute traditional sand filters and deliver potable water with low turbidity at all times.
UF in industry: UF acts as a protective measure to Reverse Osmosis membranes in industrial ultrafiltration systems by pre-treating suspended solids.
A combined ultrafiltration water system facilitates sewage recycling (treated), with sewage sludge, to enable industries to cut down on fresh water reliance.
Applications include:
Automation eliminates operator intervention and does not compromise the quality of output.
Advantages
Considerations
Complete service coverage provides the efficiency of the membrane in the long run and the stability of the plant functioning.
Our services include:
Our emphasis is on the provision of sustainable industrial ultrafiltration systems that would retain their output throughout years of service.
Technical Expertise
Choose the manufacturers that have good knowledge about membrane usage.
Custom Engineering
Systems should balance the requirements of microbial loads and turbidity.
Automation Capability
The integration of PLC enhances consistency and minimizes downtime.
Maintenance Support
Membrane longevity requires proper planning, backwashing, and cleaning.
Industry Experience
The design of ultrafiltration systems for water treatment projects will be conducted efficiently because of experience.
Ultrafiltration Systems add value by:
The combination of nanofiltration systems and improved membrane materials continues to expand treatment options in the industry.
When a professionally designed ultrafiltration plant is invested in, the water quality will be improved with better clarity and microbial safety as well as greater downstream protection.
Whether you require:
Aquatech Plus provides automated, durable, and engineered industrial ultrafiltration systems tailored to your requirements.
Whether you want to work with reliable Ultrafiltration Systems Manufacturers in Mehsana and buy technically dependable and scalable solutions – we are ready to help you.
Get in touch with us to develop a high-performance ultrafiltration water system that will increase the quality of water, its reliability in operation, and its prolonged efficiency.
| Model No. | Qty of APUF Modules | Reclaimed Water (24 GFD) GPD | Reclaimed Water (m³/day) | Surface Water (35 GFD) GPD | Surface Water (m³/day) | Seawater (48 GFD) GPD | Seawater (m³/day) | Ground Water (53 GFD) GPD | Ground Water (m³/day) |
|---|---|---|---|---|---|---|---|---|---|
| APUF-1 | 1 | 10,080 | 38 | 16,992 | 64 | 23,760 | 90 | 27,360 | 104 |
| APUF-2 | 2 | 20,160 | 76 | 33,984 | 129 | 47,520 | 180 | 54,720 | 207 |
| APUF-3 | 3 | 30,240 | 114 | 50,976 | 193 | 71,280 | 270 | 82,080 | 311 |
| APUF-4 | 4 | 40,320 | 153 | 67,968 | 257 | 95,040 | 360 | 109,440 | 414 |
| APUF-6 | 6 | 60,480 | 229 | 101,952 | 386 | 142,560 | 540 | 164,160 | 621 |
| APUF-8 | 8 | 80,640 | 305 | 135,936 | 515 | 190,080 | 720 | 218,880 | 829 |
| APUF-10 | 10 | 100,800 | 382 | 169,920 | 643 | 237,600 | 899 | 273,600 | 1,036 |
| APUF-12 | 12 | 120,960 | 458 | 203,904 | 772 | 285,120 | 1,079 | 328,320 | 1,243 |
| APUF-14 | 14 | 141,120 | 534 | 237,888 | 901 | 332,640 | 1,259 | 383,040 | 1,450 |
| APUF-16 | 16 | 161,280 | 611 | 271,872 | 1,029 | 380,160 | 1,439 | 437,760 | 1,657 |
| APUF-18 | 18 | 181,440 | 687 | 305,856 | 1,158 | 427,680 | 1,619 | 492,480 | 1,864 |
| APUF-20 | 20 | 201,600 | 763 | 339,840 | 1,286 | 475,200 | 1,799 | 547,200 | 2,071 |
| APUF-24 | 24 | 241,920 | 916 | 407,808 | 1,544 | 570,240 | 2,159 | 656,640 | 2,486 |
| APUF-30 | 30 | 302,400 | 1,145 | 509,760 | 1,930 | 712,800 | 2,698 | 820,800 | 3,107 |
| APUF-32 | 32 | 322,560 | 1,221 | 543,744 | 2,058 | 760,320 | 2,878 | 875,520 | 3,314 |
| APUF-40 | 40 | 403,200 | 1,526 | 679,680 | 2,573 | 950,400 | 3,598 | 1,094,400 | 4,143 |
Membrane fouling occurs when the UF membrane fibers are covered by minute particles, organic matter or bacteria. This causes an increase in the pressure and energy consumption. Extremely contaminated or murky water causes its occurrence to accelerate.
When the membrane is either outdated or damaged by extreme pH or rough particles then bacteria and viruses can permeate them and the water quality decreases. Test the system and change the membrane when necessary.
The pressure builds up when the scale or dirt covers the membrane surface. Wipe off the system rapidly to avoid the damage.
The membrane fibers may be broken by high pressure, rough particles or inadequate pretreatment to limit the production of water. Check counterfeit and components.
The leakages may occur due to the wearing of O-rings or improper installation. Installation- Fittings: Tighten the fittings and change seals during maintenance.
The membrane may easily get dirty within the shortest time, particularly in water with high contents of organic materials, due to fast growth of bacteria or inefficient backwashing.
We carry a specified warranty and effective after sales services to all goods provided by us. Our warranty and service system will be aimed at long-term performance, reliability in terms of work, and peace of mind of our clients, both domestic and international.
Every product has a standard warranty of manufacturing defects dating back to the dispatch date or the date of installation, as existing. The warranty includes the defects to the quality of material and workmanship in the normal operation condition.
There are various warranty terms based on the product category, model, application and environment of use. Specifics on warranty period and coverage are provided in detail during the confirmation of orders or issue of invoice.
Warranty is not applicable on damages caused by:
Our technical support provides our clients with instructions on how to install, answer technical questions as well as basic troubleshooting. Depending on where the project is located, support is accomplished by providing documentation, remote assistance or by organizing services with service partners.
We assist both domestic and foreign clients with well-organized contact and export documentation. In the case of international customers, technical support and service management are offered remotely to have a comfortable functioning and prompt problem resolution.
There is a process in which service requests are processed. When we get a support request, we examine the problem and determine the warranty eligibility and suggest a remedy. The response timelines can be different depending on the product, location and availability of the components.
The above warranty and support terms are the standard policy which we use in our whole product line. Particular product-level warranty information might vary and are provided independently when taking orders.
This Warranty & Support section represents our standard company-wide policy and is consistently applied across our complete product range. The content is intentionally displayed on multiple product pages to communicate uniform warranty coverage, service terms, and support procedures.
While the core policy remains the same, actual warranty duration, coverage scope, and service conditions may vary by product model, application, and operating environment. Product-specific warranty details are shared separately at the time of order confirmation or documentation.
